Embedded Software Engineer

Job Opening for Embedded Software Engineers @ BOSCH, Bangalore/ Coimbatore

Posted on December 15, 2008. Filed under: Embedded Software Engineer, Embedded system | Tags: , , , , , , , , , |

BOSCH,

“Made by Bosch” stands for outstanding quality of a global player. Profit from the multitude of career opportunities in an internationally positioned company. The department ECB offers both micro-controller based embedded projects and non-embedded tool development projects in the area of automotive energy systems, body electronics, automotive steering systems and automotive aftermarket product segments of Bosch catering to various Bosch locations in Germany, USA, UK and Australia.

ECB offers embedded software development support to state-of-the-art body electronics products like advanced wiper systems with integrated rain-sensors and body computers. ECB is recognized as a competence center for independent Verification & Validation of body electronics software and also for development of software components or software ‘building blocks’ used in embedded software development.

With the proposed launch of a diagnostic center to address Asia/Pacific region, ECB is poised to extend the coverage of Bosch KTS series of vehicle testers used in service centres to most vehicle brands & types in the region. The other automotive after market products being supported by ECB in software development and testing are the FSA series of engine analysers, other OE testers in addition to contributing in the development of low-coast testers for emerging markets.

This Job is posted in http://www.boschindia.com/content/language1/html/3451.htm  for more details visit http://www.boschindia.com/content/language1/html/3451_3755.htm

Embedded software engineers (Code: 0802003)

Your Tasks:

  • Responsible for the software engineering of Body Electronics systems
  • Focus on optimum and reliable software
  • Development of Software components known as Building Blocks
  • Deal with a wide range of communication technologies such as LIN,CAN and Flexray
  • Deal with diagnostics protocols like KWP2001 and UDS
  • Using Tools like Compilers, Debuggers, Emulators, Oscilloscope, Signal generators, Rational Clear case for SCM and DOORS for Requirement Management during the software development life cycle
  • Deal with system design tools like dSpace
  • Deal with module test tools like IBM rational test real time
  • Deal with software close to hardware (device drivers)
  • Deal with test automation.

Our Expectations:

  • BE/B. Tech/ M. Tech in Electrical/ Electronics/ Instrumentation
  • An experience of 2-6 years in Microcontrollers, usage of emulators, debuggers & logic analyzers
  • Aware of C, assembly language programming for real-time embedded systems and have knowledge of automotive communication protocols like CAN and LIN.
  • Knowledge of I2C, SPI protocols
  • Good knowledge of software engineering practices
  • Good analytical & communication skills
  • Exposure to Automotive Domain is an advantage
  • For profiles with > 7 years, experience in project management is needed
Advertisements
Read Full Post | Make a Comment ( None so far )

DSP (Embedded) Professionals, 2 to 10Yrs experience, Bangalore

Posted on March 6, 2008. Filed under: Bangalore, Embedded Software Engineer |

DSP – Video:

Experience: 4 – 15Yrs

Development of video codecs (H.264,H.263, MPEG2/4, WMV, VC1, AVS, SVC)
Porting and optimization of video codecs on DSP (TI, ADSP), RISC (ARM, MIPS), Multicore and configurable processors (Tenslica, Stretch)
Research on Next generation Video Algorithm, Video analytic)
Location: Bangalore.

Openings for DSP (wireless) professionals

Skills required
·  Extensive knowledge of OFDM algorithms (channel es,timation, Mobile  Synchronization, ranging, advanced antenna system,    MIMO, Frequency Estimation)
·  DSP -FPGA based architectures for OFDM,CDMA  systems
·  Hands-on with step-by-step baseband-to-RF integration

Location: Bangalore.

Exp: 8- 15Yrs.

Openings for DSP ( Embedded ) Professionals
Exp: 2 – 10Yrs

DSP Professionals who has worked on CEVA Processor.

Location: Bangalore.

Client Profile

Our client is a  SEI CMM level 5 company.From Automotive to Aerospace, Enterprise to Consumer Electronics, Entertainment to FMCG, Media to Storage, Semicon to Telecom, our client provide customized design solutions to companies across the globe. They ensure cost-effective, time-to-market solutions through a highly motivated skilled workforce driven by strong design principles, highest levels of quality and ethical business practices.

Touching people’s lives in myriad ways, their solutions can impact directly or subtly, leaving a mark of excellence in its wake.

Please send your updated CV mentioning

Willingness to relocate to Bangalore:
Current CTC  :
Expected CTC:
Notice period :

Regards,
Savithaprakash
Prowess Placements
savithaprakash@prowessplacements.com
Ph:080- 23253352 / 9972888334

Read Full Post | Make a Comment ( None so far )

Lead Engineer / Project Lead / APM, 5 to 10 yrs experience – HCL, Bangalore

Posted on January 7, 2008. Filed under: Bangalore, C, CPlusPlus, Embedded Software Engineer, Project Leader |

Company: HCL

POSITIONS: Lead Engineer / Project Lead / APM

EDUCATION: BE / B Tech / ME / M Tech / MSc (Elec)

YEARS OF EXPERIENCE: 5 to 10

WORK LOCATION: Bangalore

SKILL SETS:

Development experience:

•       Embedded Software development experience
•       Microcontroller based system design experience
•       Project Lead and above should have minimum 2 years of team leading experience
•       Should have good knowledge of SDLC

Testing experience:

•       Testing Experience in Aerospace domain (Avionics Standards)
•       Knowledge of Structural Coverage Analysis (or Code Coverage Analysis)
•       System / Functional Testing experience
•       Project Lead and above should have minimum 2 years of team leading experience
•       Good communication skills required
•       Good Problem solving and Analytical skills

PROGRAMMING LANGUAGES: C / C++ / Embedded C / ADA / ADA83 / ADA95

TESTING TOOLS: RTRT / CANTATA / LDRA Testbed / Vectorcast / Codetest.

Read Full Post | Make a Comment ( None so far )

Embedded Engineer, 3 to 5 years experience – IT – New Standards, Bangalore

Posted on December 3, 2007. Filed under: Bangalore, Embedded Software Engineer, Embedded system |

Job Title: Embedded Engineer (Application Verification validation)

Company Name: IT – New Standards Pvt. Ltd.

“IT NEW STANDARDS” is a Recruitment Process Consultancy arm of reputed ITEKAR GROUP, which has interests in IT services, Training & development, Technology Consulting, Real Estate, Event Management(www.itekargroup.com).

We are retained by some of the top companies as their strategic recruitment partners. We work in verticals like Telecom, Banking, Finance, Manufacturing, Retail etc. We are in the process of recruiting people for our clients in IT, ITES and non-IT sectors.

A MNC lcoated in Bangalore is looking out for Embedded engineers.If this opportunity Interest u pl forward ur resume to ajmal@itekargroup.com,Immidiatly along with the following details,

Current CTC:
Expected CTC:
Notice Period:

Experience in years: 3 – 5yrs

Mandatory Skills :

Good hands on knowlege of embedded systems design of SoCs specifically in the area of module and system validation.Good prograaming knowledge in C and an aptitude for debugging is a must.Knowledge of Quick Turn platform and AVV methodology, Hardware board handling and debugging/schematic interpretation
good communication skill and a very good team player.

Job Location: Bangalore
Apply Email: ajmal@itekargroup.com
Contact number: 9902000188

Read Full Post | Make a Comment ( None so far )

Embedded Software Engineer, 4-12 years experience – iqura,Mysore, Bangalore

Posted on April 13, 2007. Filed under: Embedded Software Engineer |

Embedded Software Engineer – Railway Domain with 4-12 years experience

. Should have at least 4 Years of Experience in Embedded Software – Railways Domain.
. Should have strong experience in Fail safe software development for Automatic train controls, Automatic train protection, Railway signaling
. Should be Familiar with CENELEC EN50128, CENELEC EN50126 RAMS

   Essential Skills: RAILWAY SIGNALLING , RAILWAY SAFETY STANDARDS, AUTOMATIC TRAIN CONTROL , AUTOMATIC TRAIN PROTECTION, CENELEC EN50128, CENELEC EN50126 RAMS

     Location: Mysore, Bangalore

If this job is suitable for you, call us back immediately to Schedule an Interview for you.

Call Ramya at 9448990705 or on 2552 9209 for this position.
Apply For This Position To: ramya.eradi@iqura.net

Contact us:

5/1-87 Hosur Road
Madiwala
Bangalore 560 068

 Email:    careers@iqura.com

Read Full Post | Make a Comment ( None so far )

Liked it here?
Why not try sites on the blogroll...