Archive for November 25th, 2008

Finance Executive – 2 to 5 Years – VIPUL Group, Gurgaon

Posted on November 25, 2008. Filed under: Finance Executive, Gurgaon | Tags: , , , , , , , , , |

VIPUL Group, Gurgaon

Job Title:

Finance Executive

Job Location: Gurgaon
Job Description: The candidate will be responsible for:
  • Assisting in Compilation of project reports for bank financing of projects.
  • Assisting in preparation of replys to the queries raised by Financial Institutions /Banks.
  • Preparation of Cash Flows, projected B/S & P&L A/C & CMA data for banks.
  • M.I.S
Desired Profile: The ideal candidate would be:
  • Education – MBA (Finance)/B.COM./M.COM./CA or ICWAI
  • Specific Knowledge/skills: Tally, Excel, Word etc.
  • He/She must have good communication skills (written/Verbal).
  • Experience – 2 to 5 years
  • Age – 23 to 30 years

This Job is posted in http://vipulgroup.in/open_positions.html# for more details visit http://vipulgroup.in/finance_executive.html

Read Full Post | Make a Comment ( None so far )

Project Engineer – 1-3 years relevant experience in construction – VIPUL Group, Gurgaon

Posted on November 25, 2008. Filed under: Civil Engineer, Gurgaon | Tags: , , , , , |

VIPUL Group, Gurgaon

Job Title:

Project Engineer

Job Location: Gurgaon
Department: Projects
Vacancies: 3 Nos
Reports to: Project Manager
Objective of the job
To take care of all civil construction/site management activities at the construction site and coordination with the contractors/suppliers to ensure completion of project within time, cost & quality parameters.
Principal duties and responsibilities
  • To prepare an action plan to meet planned construction schedules.
  • Projections of manpower requirements & ensure its compliance by contractors.
  • Supervise day to day work and check all materials specification before use.
  • Ensure execution of project as per drawing specification.
  • Ensure compliance of quality specification in construction.
  • Ensure adequate safety measures for labour force in project as per safety norms.
  • Will prepare and send the weekly progress report.
Desired Candidates profile
  • Degree in Civil with 1-3 years relevant experience in construction or similar Industry.
  • Proficiency in computer.
  • Good communication, presentation and interpersonal skills.
  • Should be a good team player.
  • Should be independent and go-getter.

This JOb is posted in http://vipulgroup.in/open_positions.html# for more details visit http://vipulgroup.in/project_engineer.html

Read Full Post | Make a Comment ( None so far )

Project Manager – 5-8 years relevant experience in construction or similar Industry – VIPUL Group, Gurgaon

Posted on November 25, 2008. Filed under: Civil Engineer, Gurgaon | Tags: , , , , |

VIPUL Group, Gurgaon

Project Manager

Job Location: Gurgaon

Department: Projects
Objective of the job
To take care of all civil construction/site management activities at the construction site and coordination with the contractors/suppliers to ensure completion of project within time, cost & quality parameters.
Principal duties and responsibilities
  • Plan the construction schedule in consultation with cross functional project team.
  • Identification of inputs required for completion of the project within stipulated time and cost.
  • Liaison with internal departments/architecture/Engineering for smooth execution of the project.
  • Implementation of quality system procedures applicable for project.
  • Preparation of MIS report and project planning report.
  •  Projections of manpower requirements & ensure its compliance by contractors.
  • Supervise day to day work and check all materials specification before use.
  • Ensure execution of project as per drawing specification.
  • Ensure compliance of quality specification in construction.
  • Ensure adequate safety measures for labour force in project as per safety norms.
  • Will prepare and send the weekly progress report.
Desired Candidates profile
  • B.Tech/B.E-Civil with 5-8 years relevant experience in construction or similar Industry.
  • Must know the computer.
  • Good communication, presentation and interpersonal skills.
  • Should be good team player.
  • Should be independent and go-getter.

This Job is posted in http://vipulgroup.in/ for more details visit http://vipulgroup.in/open_positions.html#

Read Full Post | Make a Comment ( None so far )

Electrical Engineer – 1+ Years in Applied Materials as an RFT or Contractor – Applied Materials, Inc. – Bangalore

Posted on November 25, 2008. Filed under: Bangalore | Tags: , , , , , , , , |

Applied Materials, Inc.

Company Profile

Applied Materials, Inc. (*Nasdaq: AMAT) is the global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel displays, solar photovoltaic cells, flexible electronics and energy efficient glass. At Applied Materials, we apply nanomanufacturing technology to improve the way people live.

Founded in 1967, Applied Materials creates and commercializes the nanomanufacturing technology that helps produce virtually every semiconductor chip and flat panel displays in the world. The company recently entered the market for equipment to produce solar arrays and energy efficient glass.

Applied Materials service products improve yield enhancement and increase nanomanufacturing productivity.

To support our customers, Applied Materials employs approximately 14,600 people throughout the world. In fiscal year 2008, Applied Materials recorded revenues of approximately U.S. $8.13 billion.

 

Electrical Engineer I – (34) – 0802268

 

 

 

Job Description

 

   

Description

 

GPS Job description – Controller focus

  • Acts as an intermediary between customer and factory. Ensures the implementation of CEN’s, BKM’s, Safety Notices, and retrofits; and communicates performance/reliability issues.
  • Provides PLC requirements for Field Support tasks.  Specifically related to Field Manuals, spare parts lists generation, eVSPI, Design for Serviceability, BKMs.
  • Provides Beta Site Support. Specifically related to installation, operation, calibration, service and/or testing of a new hardware, process or software design.
  • Provides system support for engineering systems in reliability and/or applications lab. Provides engineering relief by working assigned projects in conjunction with vendors, customers and engineering owner. 
  • Work with AMAT Engineering in India
  • Field Escalation Focal Point: Provides for a contact point within the factory for CE’s, account teams, and/or customers to call upon. Resolves customer problems, complaints and issues utilizing appropriate internal and external resources. Act as crisis manager when necessary. Makes presentations at the engineering and management level to customers on system upgrades, support plans, technical demonstrations. There may be travel to customer or vendor sites, around 10%
  • Organizes and implements training seminars for customers and field service engineers on product upgrades, customer problems, concerns and possible solutions (Product Specialist Meetings).
  • Creates technical publications and reviews documents covering technical improvements.
  • Develop top 5 lists through the use of FRACAS, manage CLCA through closure, and inform the field through the use of CENs or internal bulletins. May need to project manage retrofits as needed.

Qualifications

  • Assists field service engineers and customers with on-site training when necessary. Helps training department to define necessary training for field service engineers on system upgrades and new systems components.
  • Initiates and provides review of ECO’s to ensure data supports fix and follow up with communication to the field.
  • Develops and presents financial analysis on retrofits, warranty costs, etc., Works with spares to help set initial stocking levels.
  • Controls expenses within Applied Materials guidelines.
  • May perform other duties as assigned
  • Electrical Engineering degree
  • Should have 1+ years experience with Applied Materials as an RFT or Contractor
  • Work with AMAT Engineering in India
  • Profile
      Job Field   Engineering  
      Locations   Asia-India-Karnataka-IND  
          Bangalore  
      Shift   Day Job  
      Travel   Yes, 20 % of the Time  

    Relocation
    No
    Hiring Initiative
    None

    This Job is posted in http://www.appliedmaterials.com for more details visit http://www.appliedmaterials.com/careers/job_experienced.html

    Read Full Post | Make a Comment ( None so far )

    Customer Engineer – 3+ Years – Technical Support – Applied Materials, Inc.- Bangalore

    Posted on November 25, 2008. Filed under: Bangalore | Tags: , , , , , , , , , , , , , , |

    Applied Materials, Inc.

    Company Profile

    Applied Materials, Inc. (*Nasdaq: AMAT) is the global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel displays, solar photovoltaic cells, flexible electronics and energy efficient glass. At Applied Materials, we apply nanomanufacturing technology to improve the way people live.

    Founded in 1967, Applied Materials creates and commercializes the nanomanufacturing technology that helps produce virtually every semiconductor chip and flat panel displays in the world. The company recently entered the market for equipment to produce solar arrays and energy efficient glass.

    Applied Materials service products improve yield enhancement and increase nanomanufacturing productivity.

    To support our customers, Applied Materials employs approximately 14,600 people throughout the world. In fiscal year 2008, Applied Materials recorded revenues of approximately U.S. $8.13 billion.

     

    Customer Engineer I – (33) – 0802723

     

     

     

    Job Description

     

       

     

    Apply Online

    Description

     
    Responsibilities
    • Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance.
    • Able to perform routine preventative maintenance within established timeframes.
    • Completes quality repairs.
    • Responds to fab issues by communicating with other engineers and participating in escalation conference calls.
    • May participate in projects to reduce costs and increase uptime.
    • Verifies operational quality of system equipment.
    • Assists senior engineers as needed.
    • Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.
    • Ability to diagnose and resolve technical problems.
    • Uses training and experience to identify some process, software or hardware related system problems.
    • Strives to perform BKM’s 
    • Uses knowledge management systems. Follows all IP guidelines.
    • Assumes responsibility for complete customer satisfaction within work area.
    • Assists in planning, communicating, and coordinating support plans with customer management.
    • Complies with all safety procedures and consistently demonstrates safety as a value.
    • WORKING CONDITIONS:May be exposed to cramped work space, mechanical, electrical, and/or chemical hazards.
    • Requires attentiveness to safety precautions at all times.
    • Occasionally required to work rapidly for prolonged periods of time. Will routinely bend, stoop, reach and walk.
    • Will be required to work overtime and/or travel on short notice, including unscheduled call-in from home and work other shifts as needed.
    • Other duties as required.
    Job Specific Knowledge

    Qualifications

     
    Skills
    • Demonstrates skills and proficiency to operate successfully in the customer environment providing standard service activities of limited to moderate complexity.
    • Demonstrates capabilities to diagnose and repair basic failures on semiconductor equipment.
    • Ability to routinely lift, pull, or push objects weighing up to 50 lbs. with or without accommodation.
    • Ability to effectively use hand tools, meters, scopes and other pertinent specialized equipment.
    • Strong customer communication skills.
    Education
    MINIMUM REQUIREMENTS:
    • Diploma and 3+years of related experience, or equivalent, or
    • Requires current driver’s license and passport.
    • Must be willing and able to travel.
    • Flexibility to work on shifts/overtime/standby/on-call/holidays when required.
    INCUMBENTS ARE PREFERRED WHO POSSESS THE FOLLOWING:
    • Previous electromechanical system troubleshooting experience in the semiconductor industry.
    • Previous related semiconductor process troubleshooting experience.
    • Well developed technical communication skills.
    • Well developed customer communication skills in providing customer management, including identifying customer needs and appropriate problem resolution.
     

    Profile
      Job Field   Technical Support  
      Locations   Asia-India-Karnataka-IND  
          Bangalore  
      Shift   Day Job  
      Travel   Yes, 10 % of the Time  

    Relocation
    Yes
    Hiring Initiative
    Solar

    This Job is posted in http://www.appliedmaterials.com for more details visit http://www.appliedmaterials.com/careers/job_experienced.html

    Read Full Post | Make a Comment ( None so far )

    Application Engineer – Statistical Application Control(SPC) – Applied Materials, Inc – Bangalore

    Posted on November 25, 2008. Filed under: Bangalore | Tags: , , , , |

    Applied Materials, Inc.

    Company Profile

    Applied Materials, Inc. (*Nasdaq: AMAT) is the global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel displays, solar photovoltaic cells, flexible electronics and energy efficient glass. At Applied Materials, we apply nanomanufacturing technology to improve the way people live.

    Founded in 1967, Applied Materials creates and commercializes the nanomanufacturing technology that helps produce virtually every semiconductor chip and flat panel displays in the world. The company recently entered the market for equipment to produce solar arrays and energy efficient glass.

    Applied Materials service products improve yield enhancement and increase nanomanufacturing productivity.

    To support our customers, Applied Materials employs approximately 14,600 people throughout the world. In fiscal year 2008, Applied Materials recorded revenues of approximately U.S. $8.13 billion.

     

     

    Application Engineer I -(34) – 0802661

     

     

     

    Job Description

     

       

    Description

     
    Responsibilities
     
    Provide timely and effective support to the assigned customer base with regards to
    application engineering issues. Include (but is not limited to) conducting
    demonstrations to customers.
    Ensure customer satisfaction with results.
    Assist Regional Business Managers as well as Key Account Technologists to reach
    Closure on sign-off.
    Transfer new application capabilities from product division to customer and
    Customer Service Division. Coordinate customer presentation through KAT and BM and divisional Total Product Support.
    Maintain high level of technical expertise in assigned field via ongoing training, both internal and external to Applied.                                                  
    Performs other duties as assigned
     

     

    Qualifications

     

    Skills  

    Thorough knowledge of Chemistry/Physics/Characterization of assigned area;

    > Basic knowledge of system hardware and application interactions of assigned area;

    > Knowledge of Wafer Fabrication operators.

    > Knowledge of “Statistical Application Control(SPC) on system metrics.

     

    Education

    BE/B.Tech, ME/M.Tech specialised in Material Science/Metallurgy/Micro-Electronics/Solid-State Physics

    Profile
      Job Field   Engineering  
      Locations   Asia-India-Karnataka-IND  
          Bangalore  
      Shift   Day Job  
      Travel   Yes, 75 % of the Time  

    Relocation
    Yes

    This Job is posted in http://www.appliedmaterials.com for more details visit http://www.appliedmaterials.com/careers/job_experienced.html

    Read Full Post | Make a Comment ( None so far )

    Program Manager – 8+ years work experience (preferably 3+ years as Program Manager) – Applied Materials, Inc.- Bangalore

    Posted on November 25, 2008. Filed under: Bangalore | Tags: , , , , , , , , , , , , |

    Applied Materials, Inc.

    Company Profile

    Applied Materials, Inc. (*Nasdaq: AMAT) is the global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel displays, solar photovoltaic cells, flexible electronics and energy efficient glass. At Applied Materials, we apply nanomanufacturing technology to improve the way people live.

    Founded in 1967, Applied Materials creates and commercializes the nanomanufacturing technology that helps produce virtually every semiconductor chip and flat panel displays in the world. The company recently entered the market for equipment to produce solar arrays and energy efficient glass.

    Applied Materials service products improve yield enhancement and increase nanomanufacturing productivity.

    To support our customers, Applied Materials employs approximately 14,600 people throughout the world. In fiscal year 2008, Applied Materials recorded revenues of approximately U.S. $8.13 billion.

     

    Program Manager IV- (37) – 0801712

     

     

     

    Job Description

     

       

     

    Position:Program Manager

     

    Job Description:

    Prior experience in engineering product development preferred.

    Ability to work in cross-functional environment with design engineering, manufacturing, marketing and business development teams.

    Prior experience in supplier interaction (selection / qualification, development) essential.

    Responsible for leading the program team and planning, execution for successful product development using Program Life Cycle (PLC) methodology.

    Excellent written and oral communication skills.Knowledge of solar cell or integrated circuit manufacturing process desirable.

    Qualifications

    Qualification:Engineering degree (ME / EE / IE / Materials).

     

    Experience:8+ years work experience (preferably 3+ years as Program Manager).

     

    Profile
      Job Field   Engineering  
      Locations   Asia-India-Karnataka-IND  
          Bangalore  
      Shift   Day Job  
      Travel   Yes, 10 % of the Time  

     

    Relocation
    No
    Hiring Initiative
    Solar

    This Job is posted in http://www.appliedmaterials.com/careers for more details visit http://www.appliedmaterials.com/careers/job_experienced.html

    Read Full Post | Make a Comment ( None so far )

    Mechanical Engineer – 4+ Years – Applied Materials, Inc. – Bangalore

    Posted on November 25, 2008. Filed under: Bangalore | Tags: , , , , , , , , , , , , |

     

    Applied Materials, Inc.

    Company Profile

    Applied Materials, Inc. (*Nasdaq: AMAT) is the global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel displays, solar photovoltaic cells, flexible electronics and energy efficient glass. At Applied Materials, we apply nanomanufacturing technology to improve the way people live.

    Founded in 1967, Applied Materials creates and commercializes the nanomanufacturing technology that helps produce virtually every semiconductor chip and flat panel displays in the world. The company recently entered the market for equipment to produce solar arrays and energy efficient glass.

    Applied Materials service products improve yield enhancement and increase nanomanufacturing productivity.

    To support our customers, Applied Materials employs approximately 14,600 people throughout the world. In fiscal year 2008, Applied Materials recorded revenues of approximately U.S. $8.13 billion.

     

     

    Mechanical Engineer II- (35) – 0801710

     

     

         

     

    Description

          Job Description:

    • Engineer with hands on  experience in generating design concepts and comparing, ranking various design options.
    • Experience in automation of material handling systems and knowledge of robotics.
    • Detailing, drafting skills in Inventor and Catia.
    • Working with vendors to build the prototype and performing design validation tests.
    • Excellent documentation and communication skills

     

    Qualifications

    Qualification:

    B.E/ BTech/ ME/MTech (Mechanical)

     

    Experience:

    4+ years directly related experience preferred with Semiconductor/Capital equipment/Automotive/Heavy Mechanical Industry

    Profile
      Job Field   Engineering  
      Locations   Asia-India-Karnataka-IND  
          Bangalore  
      Shift   Day Job  
      Travel   Yes, 10 % of the Time  

    Relocation
    No
    Hiring Initiative
    Solar

    This Job is posted in http://www.appliedmaterials.com/careers for more details visit http://www.appliedmaterials.com/careers/job_experienced.html

    Read Full Post | Make a Comment ( None so far )

    Liked it here?
    Why not try sites on the blogroll...